#Realtek 8192cu driver vista android

#Realtek 8192cu driver vista android

On Android 10 I can just check if I'm connected with the right wifi, well at least theoretically (see step 7). When the user rejected my suggestion I'm almost out of the game I can never ask the user again (well technically there is a well hidden feature where you can switch the permission, but no user will ever find it).However I still don't know if the device actually connected with the wifi.

On Android 11 this is possible (see step 2). I cannot verify on Android 10 if my suggestion was accepted.

When the user accepts my suggestion I'm fine so far.

Wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=yes default-ap-tx-limit=0

Wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0ĭefault-client-tx-limit=0 hide-ssid=yes security-profile=default compression=noġ R name='wlan2' mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:03 arp=enabled interface-type=Atheros AR9888 mode=ap-bridge ssid='xxxxx-5' frequency=5660īand=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX secondary-frequency='' scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1

0 R name='wlan1' mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:04 arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid='xxxx-2' frequency=autoīand=2ghz-b/g/n channel-width=20/40mhz-XX secondary-frequency='' scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled